ScubaTANK®: Checking the filter and filling your tank
Lloyd Preston
26 July 2018
Is your ScubaTANK® not filling correctly? This quick video guides you through checking the isolator, inspecting the filter for debris, and ensuring your tank fills automatically when all probes are submerged.
For more expert tips on maintaining your water storage and fire safety systems, explore Dutypoint’s Knowledge Point videos or contact our team for support today.
00:04
If the left probe relay is showing both the green and orange lights, then the tank should be filling. If you notice it isn’t, then you’ll need to check the isolator is in the on position and that the filter is clear.
00:20
To check your filter, turn off the isolator, remove the filter cap, remove the filter, and then check it’s clean of debris. When the tank is full and all the probes are submerged under water, it will stop filling automatically.
00:45
You’ll note that the probe relay is now showing a green light on the left and a green and orange light on the right, so your unit is now ready to run.
