MiniBreak

MiniBreak

Product Description

The MiniBreak single pump packaged tank and booster set has been designed to be compact and provide fluid category 5 backflow protection via ‘AB’ air gap complying with the water supply (water fittings) regulations 1999 and comes as a complete package in an enclosed stainless steel cabinet suitable for wall or floor mounting.

The pump control is provided by a well-proven intuitive controller which will start the pump on falling pressure and stop the pump when flow ceases. The control unit also provides low water protection.

Volt Free Contacts – Pump Running.
Both open and closed volt free contacts are available which indicate if the pump is running. See appropriate drawing for volt free contact wiring configurations.

Frost protection options available.

APPLICATIONS
- Wash down in bin stores
- Dentist’s rinsing equipment
- Laboratory water supplies
- Single hosepipe supplies
- Any application where category 5 protection is required - mortuaries, abattoirs, zoos, healthcare premises, etc.

Request a quote

MiniBreak Pump Curve

Pump Curve

Typical duty: 0.25l/s @ 2 bar
Characteristic curve and performance data
50 Hz n=2900 1/min HS=0m

Download the datasheet

MiniBreak dims

Specification

Housing material

Stainless Steel

Break Tank Capacity

18 litres

Ball Valve

Brass

Pump Body

Ryton

Pipework & Fittings

Copper / Brass / Stainless Steel

IP rating

IP54 (IP65 Controller)

Noise Emissions

<70 dB(A)

Rating

1A - 50V MAX

 

Download the Operation and Maintenance manual