ProtectoSAN®
Take control of limescale with Dutypoint’s proven commercial electrolytic limescale inhibitor.
Dutypoint ProtectoSAN® is a uniquely powered electrolytic scale inhibitor kit for commercial hot water systems. Independently tested, it is a low-maintenance way to protect a property against the damaging and expensive impact of limescale.
The ProtectoSAN® solution is widely specified and installed in a range of sectors, such as manufacturing, hotels, retail and supermarkets, healthcare, education, and public authorities.
Project Enquiry Get a QuoteTake control of limescale with Dutypoint’s proven commercial electrolytic limescale inhibitor.
Dutypoint ProtectoSAN® is a uniquely powered electrolytic scale inhibitor kit for commercial hot water systems. Independently tested, it is a low-maintenance way to protect a property against the damaging and expensive impact of limescale.
The ProtectoSAN® solution is widely specified and installed in a range of sectors, such as manufacturing, hotels, retail and supermarkets, healthcare, education, and public authorities.
ProtectoSAN® Model Options
ProtectoSAN® Resources
FILTER
Can't find what you are looking for?
Call nowProtectoSAN® Specification
PRODUCT OVERVIEW
– Long-lasting protection against the formation of hard limescale
– Ensure bacteria have fewer places to hide as a result of cleaner surfaces
– Protects capital investment
– Independently tested and proven
– WRAS approved
– Not reliant on LSI
– Permanent treatment of water
– Used and specified in all market sectors
PROVEN PERFORMANCE
The electrolytic zinc anode technology as used in ProtectoSAN® is listed in the UK Building Regulations – Part L Building Services Compliance Guide, whereas “external to pipe” water conditioning techniques (for example, using magnetic or electronic effects) are not mentioned. ProtectoSAN®’s low-level zinc additions change the water chemistry and inhibit the formation of limescale by transforming calcium carbonate crystals so that they do not stick. Research reports from Cranfield University confirming the effectiveness of ProtectoSAN® zinc-based technology are available and will be provided upon request.
PROTECTOSAN® DELIVERS VALUE ENGINEERING
Research confirms that our ProtectoSAN® zinc treatment process does not decay after dosing, and its effectiveness is not impacted by water storage or agitation caused by passing through a booster set. ProtectoSAN® can be installed in the rising main before the water storage tank and booster set. Capex cost savings are probable because the rising main pipe size is often a smaller diameter than the hot and cold water distribution pipe sizes. As our treatment does not decay, we only need to install one ProtectoSAN® system to treat the whole location, which also offers an attractive value engineering opportunity.
NOTES
– Commissioning is included. It is important to include this, as the warranty is extended to 24 months. It also ensures that the ProtectoSAN® system is set up to match local water quality and plant operating conditions.
– Value engineering can be delivered by installing one ProtectoSAN® system in the rising main before a cold water storage tank. This is possible because inlet pipe sizes can be of a lower diameter than distribution network pipe sizes.
– One ProtectoSAN® can treat the whole location and is also available as a pack, excluding the filter.
ProtectoSAN® Water Hardness Checker
Water hardness postcode checker
Input your postcode or the postcode of the installation area. We’ll let you know the water hardness in that area and if a ProtectoSAN® is required
This property needs limescale prevention.
In areas where limescale exceeds 200ppm, the Compliance Guide to Part L of the UK Building Regulations recommends adopting limescale control measures such as an electrolytic device.
Take control of limescale with Dutypoint’s proven commercial electrolytic limescale inhibitor, ProtectoSAN®
We’re always here to help
Need a quote?
Send us an email at enquiries@dutypoint.com and our pump specialists can help.
Email usUnsure which pump?
Not sure what pump you need? Let us know a few details and we’ll call you back
Get in touchMore resources
Converters, calculators, videos guides and more in our Knowledge Point
View resourcesI recently purchased a Dutypoint Booster Pump/Tank and Pressurised Cylinder. I am very impressed with the quality and functionality of the equipment. Dutypoint was able to calculate very precisely what my requirements were. Communication was excellent.
Chris Esselborn
All pumps, tanks and booster sets are made very well. Their technical team are very friendly and knowledgeable and quick to answer on phone and email. Their tanks and specially packaged ScubaTANK® are very effective in volume and footprint.
Nill Armestrong





