Flowboost® Pro
The Flowboost® Pro is a range of variable speed booster sets that utilises a robust control philosophy through the use of an IP66 metal control panel incorporating relevant MCBs, relays, and terminals connected to IP55 pump motor mounted E-Motion variable speed inverter drives, which offer a wide array of features from the digital display.
The booster set range has KIWA Regulation 4 approval and has been designed using Regulation 4/WRAS-approved pumps, valves, flow-through valves, and vessels.
These units are suitable for commercial and industrial use and are fully wired and tested prior to despatch.
Project Enquiry Get a Quote
The Flowboost® Pro is a range of variable speed booster sets that utilises a robust control philosophy through the use of an IP66 metal control panel incorporating relevant MCBs, relays, and terminals connected to IP55 pump motor mounted E-Motion variable speed inverter drives, which offer a wide array of features from the digital display.
The booster set range has KIWA Regulation 4 approval and has been designed using Regulation 4/WRAS-approved pumps, valves, flow-through valves, and vessels.
These units are suitable for commercial and industrial use and are fully wired and tested prior to despatch.
Flowboost® Pro Model Options
Flowboost Pro 2V.E.K.H Series 1 Phase
Flowboost Pro 2V.E.K.H Series 3 Phase
Flowboost Pro 3V.E.K.H Series 1 phase
Flowboost Pro 3V.E.K.H Series 3 phase
Flowboost Pro 4V.E.K.H Series 1 phase
Flowboost Pro 4V.E.K.H Series 3 phase
Flowboost® Pro Resources
Flowboost® Pro Specification
Product overview
– Regulation 4/WRAS-approved stainless steel horizontal multi-stage pumps
– Regulation 4/WRAS-approved isolating valves and non-return valves
– Regulation 4/WRAS-approved flow through valve and anti-cycle vessel arrangement
– Stainless steel suction and food-grade discharge manifolds
– Suitable for a single phase 230 V or 3 phase 415 V supply
– Pump-mounted inverter
– Robust steel powder-coated base
– Power supply under and over voltage display
– Digital operation/error status signalling via LEDs and on-screen alerts display
– Efficient leakage monitoring to protect pumps in the event of repeated starts
– Intelligent overload cut out to increase the longevity of inverters
– Low water level facility and BMS volt-free contacts (2 inputs and 2 outputs)
– Automatic rotation of duty pump to ensure even wear
– Communicates with up to 8 pumps
– Slow fill facility (adjustable timings) on power interruption and low water level activation
– Fire sprinkler activation terminals
– Common and individual pump BMS fault contacts
*Higher temperature options available; please contact the sales team. **More specific details available on request.
We’re always here to help
Unsure which pump?
Not sure what pump you need? Let us know a few details and we’ll call you back
Get in touch
More resources
Converters, calculators, videos guides and more in our Knowledge Point
View resources
