Integrated Pump and Tank Systems

Optimise™

The Optimise™ system from Dutypoint redefines what’s possible with packaged plant rooms, delivering a safe, compact, and fully integrated underground solution for water system installations.

Designed to address space constraints and simplify on-site setup, Optimise™ is ideal for both new builds and retrofit applications where plant room space is limited or unavailable.

Each Optimise™ packaged plant room integrates industry-leading technologies into a weatherproof, pre-assembled unit that’s delivered to site ready for rapid deployment. It offers long-term cost savings, reduced installation time, and lower carbon footprint, all while ensuring ease of access and maintenance.

Compatible with most Dutypoint booster sets, the Optimise™ system delivers dependable pressure management and water storage in a single, below-ground package.

Project Enquiry Get a Quote

Project Enquiry Get a Quote

The Optimise™ system from Dutypoint redefines what’s possible with packaged plant rooms, delivering a safe, compact, and fully integrated underground solution for water system installations.

Designed to address space constraints and simplify on-site setup, Optimise™ is ideal for both new builds and retrofit applications where plant room space is limited or unavailable.

Compatible with most Dutypoint booster sets, the Optimise™ system delivers dependable pressure management and water storage in a single, below-ground package.

Model Options

Resources

Specification

Gallery

Get in touch

Optimise™ Model Options

UPPR-304

4200

UPPR-305

7500

UPPR-306

11,100

UPPR-307

14,600

UPPR-308

18,100

UPPR-309

21,600

UPPR-310

25,200

UPPR-311

28,700

Optimise™ Resources

FILTER

Optimise™ Consultant Specification Template

docx

Optimise Technical Brochure

pdf

Can't find what you are looking for?

Call now

Optimise™ Specification

STANDARD TECHNICAL FEATURES

– Space to install plant equipment, such as:
– Variable-speed cold-water booster set complete with pumps, valves, pressure vessels, pressure sensors and pipework
– GRP-insulated cold-water break tank with AF or AB air gap, overflow and level controls
– Electromagnetic water conditioner
– UV disinfection equipment
– Controls and HMI devices
– Reinforced concrete and steel frame allows installation in high water table areas and heavily loaded areas
– Integrated concrete shuttering system for fast, safe and economical installation, saving concrete and reducing personnel entries into excavated area
– Supplied complete with aluminium access cover, available in a choice of colours
– Full-sized, fixed staircase for safe entry and egress with access cover operable by a single person
– Underfloor bund to prevent the risk of flooding in the unlikely event of tank or pipe failure
– Underfloor sump pumps to remove any excess water from the bund area
– Actuated inlet valve with automatic shut-off in case of water overflow with battery backup
– Mechanical ventilation air handling unit for constant replenishment of fresh air and temperature control
– Full interior lighting with emergency battery backup
– Entry warning light system to give a visual signal of any hazards prior to entry
– Heater and frost thermostat to maintain a safe temperature
– Closed-cell foam-insulated interior roof to protect from condensation
– Remote management and monitoring system

OPTIONS

– Non-standard sizes
– Increased loading factors
– Air quality monitoring

HIGHLY CONFIGURABLE

Dutypoint, as a leading manufacturer of plant and equipment, offer the flexibility to install almost any cold water booster set as well as additional equipment in the Optimise®, such as:
– Electromagnetic water conditioners to prevent scale build-up in pipework and other plant equipment
– Ultra-violet disinfection and filtration equipment
– Boilers, air handling, CHP plants, generators and other equipment
– Modular system for larger installations where additional capacity is required
– Residential Fire Pump Systems

FAST AND SAFE INSTALLATION

By utilising a pre-fitted concrete shuttering system, the Dutypoint Optimise® can be installed in a fraction of the time of a conventional underground chamber. The shuttering system allows the concrete work to be completed in only two pours, vastly reducing overall pour time, reducing the number of entries into the excavation and therefore reducing the number of working hours required to complete the installation.

SAFE ACCESS FOR MAINTENANCE PERSONNEL

– Unlike other systems on the market this does not require two maintenance personnel, personal lifting gear or breathing apparatus (subject to site conditions). This is due to a combination of features:
– A full-size staircase and over-sized access cover allows ease of entry and exit
– A mechanical ventilation system ensures the environment is always safe without the need to carry respiratory equipment
– An underfloor flood bund area ensures that in the unlikely event that the water cistern is accidentally emptied into the plant room, the risk of drowning is greatly reduced
– Twin, independently controlled sump pumps in the bund area ensure that any excess water is quickly removed
– Integrated air quality monitoring system with audible and visual alarm system.

ADDITIONAL FEATURES

– By utilising a pre-fitted concrete shuttering system, the Dutypoint Optimise® can be installed in a fraction of the time of a conventional underground chamber.
– Compatible with boilers, air handling CHP plants, generator and other plant