MiniBREAK
The MiniBREAK single pump packaged tank and booster set has been designed to be compact and provide fluid cat 5 backflow protection via an ‘AB’ air gap. It complies with the water supply (water fittings) regulations 1999 and comes as a complete package in an enclosed cabinet suitable for wall or floor mounting.
The pump control is provided by a well-proven intuitive controller that will start the pump at falling pressure and stop the pump when flow ceases. The control unit also provides low water protection.
Product specification
Manuals
MiniBREAK O&M Manual. | |
MiniBREAK O&M Manual for models bought before April 2024. |
Datasheets
MiniBREAK MB1-38M-S datasheet. | |
MiniBREAK MB1-38M-FP datasheet. | |
MiniBREAK datasheet for models bought before April 2024. |
Brochure
A technical overview of the Dutypoint MiniBREAK. |
PRODUCT OVERVIEW
– Volt-free contact for pump running
– IP65-rated controller
– Low-water protection device
– Wall or floor mountable
– Single phase
APPLICATIONS
– Wash down in bin stored
– Dentist’s rinsing equipment
– Laboratory water supplies
– Single hosepipe supplies
– Any application where cat 5 protection is required – mortuaries, abattoirs, zoos, healthcare premises, etc.
OPTIONS
– Frost protection kit
VOLT-FREE CONTACTS
Normally open common fault volt-free contact is available, activated on low discharge pressure. See the appropriate drawing for volt-free contact wiring configurations in our O&M manual.
0.3 l/s @ 2.5 bar
0.4 l/s @ 2.5 bar
MB1-38M-FP: 21kg
*More specific details available on request.