MiniBREAK

The MiniBREAK single pump packaged tank and booster set has been designed to be compact and provide fluid cat 5 backflow protection via an ‘AB’ air gap. It complies with the water supply (water fittings) regulations 1999 and comes as a complete package in an enclosed cabinet suitable for wall or floor mounting.

The pump control is provided by a well-proven intuitive controller that will start the pump at falling pressure and stop the pump when flow ceases. The control unit also provides low water protection.

Project Enquiry Get a Quote
MiniBREAK
Annotated MiniBREAK
Project Enquiry Get a Quote

The MiniBREAK single pump packaged tank and booster set has been designed to be compact and provide fluid cat 5 backflow protection via an ‘AB’ air gap. It complies with the water supply (water fittings) regulations 1999 and comes as a complete package in an enclosed cabinet suitable for wall or floor mounting.

The pump control is provided by a well-proven intuitive controller that will start the pump at falling pressure and stop the pump when flow ceases. The control unit also provides low water protection.

MiniBREAK Specification

PRODUCT OVERVIEW

– Volt-free contact for pump running
– IP65-rated controller
– Low-water protection device
– Wall or floor mountable
– Single phase

APPLICATIONS

– Wash down in bin stored
– Dentist’s rinsing equipment
– Laboratory water supplies
– Single hosepipe supplies
– Any application where cat 5 protection is required – mortuaries, abattoirs, zoos, healthcare premises, etc.

OPTIONS

– Frost protection kit

VOLT-FREE CONTACTS

Normally open common fault volt-free contact is available, activated on low discharge pressure. See the appropriate drawing for volt-free contact wiring configurations in our O&M manual.

Range Performance
Number of pumps
1
Typical duty
0.2 l/s @ 2.5 bar
0.3 l/s @ 1.8 bar
0.4 l/s @ 1.2 bar
Break tank capacity
23 litres
Power
0.37 kW
Input current
2.5 A
Controller type
Intuitive controller
Noise data
Motor at < 70 LpA (dB +/-2)*
Weight
MB1-38M-S: 20kg
MB1-38M-FP: 21kg

*More specific details available on request.

Material Specification
Housing
LDPE
Pump body
PPE and brass
Pipework and fittings
Copper, brass, stainless steel
MiniBreak® Model
MB1-38M-S
MiniBreak® cat 5 booster system
MB1-38M-FP
MiniBreak® frost protection kit

MiniBREAK Gallery

MiniBREAK Installation
Open Image
MiniBREAK on a Plinth in Dutypoint Exhibition Room
Open Image
MiniBREAK Units Being Manufactured
Open Image

We’re always here to help

MiniBREAK Cat 5 Booster Sets from Dutypoint
Need a quote?

Send us an email at enquiries@dutypoint.com and our pump specialists can help.

Email us
MiniBREAK Cat 5 Booster Sets from Dutypoint
Unsure which pump?

Not sure what pump you need? Let us know a few details and we’ll call you back

Get in touch
MiniBREAK Cat 5 Booster Sets from Dutypoint
More resources

Converters, calculators, videos guides and more in our Knowledge Point

View resources