UniBreak™
UniBreak™ is a combined break tank and end-suction booster pump system designed for category 5 backwash protection applications.
The set is a free-standing, quiet-running unit with an integrated electronic pressure controller mounted on top of the tank. The tank is constructed from 25 mm insulated GRP with a cat 5 AB air gap and ½” equilibrium inlet
float valve. The unit also features low-level protection.
Product specification
PRODUCT OVERVIEW
– Cat 5 AB air gap
– 100-litre nominal capacity
– MA15 controller
– WRAS-approved stainless steel end-suction booster pump
– Common fault volt-free contact
– Electronic pressure controller
– IP55 rated
– GRP insulated tank
– Low-level protection
RANGE PERFORMANCE
Flow range | 0.14 – 1.25 litres/second |
Discharge head range | 10-55 metres |
Maximum system pressure | 10 bar |
Tank capacity (nominal) | 100 litres |
Power supply | 230/1/150 |
IP rating | IP55 |
Inlet connection | ½” BSP |
Outlet connection | 1” BSP |
Tank construction | GRP 25mm insulated |
Float valve | ½” equilibrium |
Dimensions | 770mm (L) x 460mm (W) x 810mm (H) |