Quantum Q4
The Dutypoint Quantum Q4 is the latest in pumpless digital pressurisation technology for light commercial and residential buildings. It’s a slim, wall-mounted, pumpless top-up pressurisation unit, with a top-up flow rate of up to 14 l/min depending on the mains or boosted mains water pressure. It is designed to be connected directly to a building’s incoming water supply using the included flexible hose. It is there to fill and maintain the pressure of a heating or chilled water system without the need for a pump.
The unit comes with a user-friendly controller that displays all operating and error conditions comprehensibly and conveniently. It features extensive data storage for online and offline analysis, microprocessor control, and self-learning algorithms with a graphical display. It comes with MODBUS RTU and BACnet communication protocols as standard and has its key operating parameters password protected.
Product specification
PRODUCT FEATURES
– Silent, pumpless pressurisation unit
– Fills system from empty
– For system volumes up to 15,000 litres
– Fluid protection Category 4 backflow prevention
– Onscreen service reminder (12 months)
– Colours: grey (RAL7016) and red (RAL3002)
– Password protected
– Pressure setting in 0.1 bar increments
– Flood protection (runtime limiter and excessive activation logging)
– Volt-free contact: common alarm (N/C or N/O), fully programmable for specific alarms, customisable via control unit
– Extensive data storage for online or offline analysis
– Advanced technology ensures the lowest power consumption, long service life and easy maintenance
– Microprocessor control, self-learning with graphical display
– Maximum flow rate of 14 l/min
– Connects directly to the mains (boosted) water mains, via included flexible hose (L = 400 mm)
ADVANTAGES
– Universal connection to drain fits 22 mm copper compression, 32 mm PP push fit and 32 mm PP solvent weld discharge pipe to BS 5254 or BS EN1451
– The user-friendly control unit displays all operating and error conditions in a logical and convenient way
– Four status LED indicators
– System safety valve monitoring
– Expansion vessel health monitoring
– Leak detection
– Usage monitor, logs and counters
– MODBUS RTU and BACnet Communication Protocol via RS485
– Two 40 cm flexible hoses (for mains and sealed system connection) included for easy installation
MAXIMUM OPERATING CONDITIONS
System temperature range at point of connection | 5°C/90°C |
Ambient temperature range | 5°C/45°C |
Max system pressure | 10 bar |
Min/max delivery pressure | 0.5 – 6 bar |
Pressure rating | PN 10 |
Protection class | IP44 |
Relative humidity | 95% non-condensing |
MATERIALS OF CONSTRUCTION
Cabinet | Mild steel CR4 powder coated |
Drain manifold | PA66 GF30 |
Check valves | POM |
Filter | POM |
Connections | In and outlet manifold: DZR Brass Tundish: PA66 GF30 |
Pipework | Stainless steel braided flexible hose/EPDM/copper |
Finish | Powder coated |
Valves | Brass/PTFE |
CONNECTIONS
System | 15 mm (compressions) |
Mains supply | 15 mm (compressions) |
Drainage (Tundish)* | ¾” BSP |
*22 mm copper compression, 32 mm PP push fit and 32 mm PP solvent weld. |