With 44-storeys between the lower basement level and the penthouse suites, maintaining good water pressure throughout the building would be a significant task.
The original specification suggested using six pump sets to provide sufficient water pressure throughout the building. Yet, thanks to Dutypoint’s expert technical knowledge, the team instead suggested a mains cold water system with three booster sets. This solution would be capable of delivering high pressure to the top floor more than 130 metres above ground level.
To achieve this, one of the three booster sets had to be PN25 rated, meaning it would be able to withstand operational pressures of up to 25 bar, but the associated pipework, valves and fittings would also need to mirror this capability. The intricacies of specifying high-pressure pipes and fittings is something that Dutypoint understands and was able to work directly with pump manufacturer Xylem and Mendick Waring to create the bespoke solution required.
The expertise within Dutypoint’s technical team coupled with its comprehensive product knowledge and an understanding of complex water management issues, meant that Ampsail was able to enhance the value proposition of the project by increasing efficiency whilst reducing overall costs. This was made possible because they were able to achieve the requisite pressure using half the number of booster systems.
The financial and operational benefits of working with a company with such a breadth of technical know-how and the ability to specify bespoke pumping systems to achieve the high specification at a reduced capital cost are clear.
The benefits were immediate and far reaching because Dutypoint’s specialist experience in projects of this nature enabled the most efficient and cost-effective solution to be delivered.
The modular design of the VMV range has been specially developed to allow consultants and contractors to tailor the set to the installation. The modular pipework design and multiple control panel locations create a huge number of permutations; for example, the four-pump VMV4 has 15,876 possible layout combinations. As each set is assembled to order, specifiers can tailor a booster set to the precise project requirements. The VMV can be delivered for on-site assembly if required.
VMV Booster sets are available in this range with two to eight pumps and are WRAS-approved with a choice of Lowara, Grundfos, Ebara and Wilo pumps.